DIY How to Custom Bogg Badges Easy Profits Perfect for Beginners

Introduction

Creating custom Bogg badges using your Glowforge is a fun and rewarding project that lets you showcase your creativity. This guide will walk you through the process of sublimating on white acrylic, provide tips for successful sublimation, explain how to sublimate and then cut on your Glowforge, and offer advice on where to purchase laser-safe acrylic. We’ll also cover the settings you need for sublimation and cutting. Plus, don’t miss our special offer on a custom badge kit to kickstart your project!

How to Sublimate on White Acrylic

Sublimating on white acrylic is a straightforward process that involves transferring a printed design onto the acrylic surface using heat. Here’s how to do it:

1. Prepare Your Design: Create or select a design and print it on sublimation paper using sublimation ink.
2. Clean the Acrylic: Ensure the white acrylic sheet is clean and free of dust or oils.
3. Align the Design: Place the printed sublimation paper face down on the acrylic sheet, securing it with heat-resistant tape.
4. Heat Press: Use a heat press set to 400°F (204°C) for about 60 seconds. Apply firm pressure to ensure the design transfers evenly.
5. Cool and Peel: Let the acrylic cool slightly before carefully peeling off the sublimation paper to reveal your design.

Tips on How to Sublimate on Acrylic

• Use High-Quality Materials: Ensure you’re using high-quality white acrylic sheets and sublimation paper for the best results.
• Preheat the Acrylic: Preheat the acrylic sheet for a few seconds to remove any moisture that could affect the transfer.
• Consistent Pressure: Apply consistent, firm pressure with your heat press to ensure even transfer across the entire design.
• Protective Sheet: Use a Teflon sheet or parchment paper between the heat press and the sublimation paper to prevent any ink from transferring to the heat press.

Sublimate on the Acrylic Then Cut on the Glowforge (Print and Cut)

After sublimating your design onto the acrylic, you can use your Glowforge to cut it into the desired shape:

1. Upload Design to Glowforge: Import your design file into the Glowforge software.
2. Align the Cut: Use the camera feature in the Glowforge to align your cut lines with the sublimated design on the acrylic.
3. Cut Settings: Use the appropriate settings for cutting white acrylic (refer to the settings below).
4. Execute the Cut: Once aligned, start the cutting process. The Glowforge will precisely cut around your sublimated design.

Where to Purchase Laser Safe Acrylic

For high-quality, laser-safe acrylic, consider these sources:

• Amazon: Offers a wide range of acrylic sheets with customer reviews to help you choose.
• Etsy: Find custom and specialty acrylic sheets suitable for laser cutting and sublimation.
• Johnson Plastics Plus: Known for their selection of sublimation-ready acrylic sheets.
• Tap Plastics: Provides a variety of acrylic sheets, including laser-safe options.

Settings to Use for Sublimation

• Temperature: 400°F (204°C)
• Time: 60 seconds
• Pressure: Firm

Settings to Use to Cut the White Acrylic Sheets

• Power: 100%
• Speed: 300 mm/min
• Passes: 1-2 passes depending on the thickness of the acrylic
• Focus Height: Adjust based on the thickness of your acrylic sheet, typically around 0.125 inches

Tripwire and Product to Sell

Tripwire Offer

Special Offer: Custom Bogg Badge Starter Kit
Get started with your custom Bogg badges with our exclusive starter kit! Includes:

• 5 white acrylic sheets (8″x10″)
• 10 sublimation papers
• Heat-resistant tape
• Detailed instruction guide
  All for just $19.99!

Product to Sell

Ultimate Custom Badge Kit
Elevate your badge-making game with our Ultimate Custom Badge Kit, featuring:

• 20 white acrylic sheets (8″x10″)
• 50 sublimation papers
• Heat-resistant tape
• Teflon sheet
• Exclusive access to our online design library
• Personalized support from our team
  Available now for $79.99!

Conclusion

Creating custom Bogg badges with your Glowforge is a fantastic way to personalize your accessories. By following this guide on sublimation and cutting, you’ll achieve professional-looking results every time. Don’t forget to take advantage of our special offers to kickstart your badge-making journey. Happy crafting!

Tags

• Custom Bogg Badges
• Sublimation on Acrylic
• Glowforge Projects
• Laser Cutting
• DIY Crafts
• Personalized Accessories
• Sublimation Tips
• Laser Safe Acrylic